Table of Contents
Advertisement
IMPORTANT SAFETY INFORMATION
Read and Understand Owner's Manual Before Riding
Read this entire Owner's Manual before you take the first ride on your
new eBike and keep it for reference. This Owner's Manual contains
important safety, performance, and service information.
Like any sport, bicycling involves risk of injury and damage. By
choosing to ride a bicycle, you assume the responsibility of that risk:
you need to know and practice the rules of safe and responsible
riding as well as proper use and maintenance. Proper use and
maintenance of your bicycle reduces the risk of injury. If you have any
questions or do not understand any aspect of using or maintaining
your bike, take responsibility for your safety and consult with your
local bicycle shop, or contact us for assistance.
This manual is not intended as a comprehensive use, service, repair
or maintenance manual. Please see your local bicycle shop for all
service, repairs, or maintenance. Your local bicycle shop may also be
able to refer you to classes, clinics, or books on bicycle use, service,
repair, and maintenance.
Your Lectric eBike is classified as an EPAC (Electrically Power
Assisted Cycle, otherwise known as a Pedelec), and is referred to in
this manual as a bicycle unless otherwise noted.
Rider's Responsibility Regarding Regulations
It is the rider's responsibility to obey the regulations that apply to your
Lectric eBike.
The regulations covering the use of your Lectric eBike vary by
state, and even municipality in certain locations. You must comply
with the local regulations related to the minimum age of the rider,
driver's license, insurance, license plate, traffic, and maximum speed
regulations, and any other regulations. These regulations may change
at any time.
L E CT R I C E B I K E S.C O M | 602.715.0907
4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XP Lite and is the answer not in the manual?
Questions and answers
Resetting the odometer
To reset the odometer on a Lectric XP Lite, hold the plus (+) button for 5 seconds.
This answer is automatically generated
how to properly install chain guard?
To properly install the chain guard on a Lectric XP Lite:
1. Remove the six screws around the perimeter of the pulley belt guard and take off the front part of the guard.
2. Use an 8 mm hex wrench to unscrew and remove the crank bolt.
3. Use a crank puller tool to remove the pulley.
4. Remove the rear part of the belt guard.
5. Place the new chain guard behind the chain stay.
6. Line up the front mounting tab with the mounting point behind the pulley and insert a 4 mm bolt.
7. Line up the rear mounting tab with the rear mounting point on the chain stay and insert another 4 mm bolt.
8. Reinstall the pulley, crank, and belt.
This process requires removing existing parts and using specific tools like a crank puller and hex wrench.
This answer is automatically generated
Serial number on XP Lite 2.0