Table of Contents
Advertisement
[ ] 6. Orient the kit supplied right side mounting bracket as shown in Figure 4. Secure the right side
mounting bracket to the distribution panel with kit supplied hardware as shown in Figure 4. Torque
hardware as indicated in Figure 4. Secure the front mounting bracket to the right side mounting
bracket as shown in Figure 4. DO NOT TIGHTEN HARDWARE (hardware will be tightened during
power extend converter installation).
Figure 4:
Install Kit Right Side Bracket
Vertiv
| eSure™ Power Extend Converter Mounting Bracket and Door Kit Installation Manual (IM60017372) | Rev. C
6-32 x 3/8" Screw
(DO NOT TIGHTEN)
Install Right Bracket
Right Bracket
6-32 x 3/8" Screw
Torque to 9.6 in-lbs.
12
Advertisement
Table of Contents
