CyberData 011114 Installation Quick Reference page 2

Features
DIP Switches
RTFM Switch
To broadcast a V2 Loudspeaker Amplifier's current IP address, press the RTFM switch on
the V2 Loudspeaker Amplifier for one second, and then release the switch to hear the IP
address announcement.
To restore the factory defaults, complete the following steps:
1. Press and hold the RTFM switch for eight seconds. The V2 Loudspeaker Amplifier will
announce the words, "restoring defaults", and then announce the words, "rebooting".
2. Release the RTFM switch. The V2 Loudspeaker Amplifier settings
will be restored to the factory default settings.
Power LED (GREEN/BLUE)
The power LED is a steady
mode. The power LED will only blink either during a boot up or a phone call.
Status LED (GREEN)
A steady LED confirms that the V2 Loudspeaker Amplifier is oper-
ational. The LED will blink during a page when it is online.
Network Activity LED (GREEN)
Network Link LED (GREEN/YELLOW)
Speaker Volume
DIP Switch Settings
DIP Switch Settings—Low Power—802.3af Compliant
DIP Switch Default Setting Description
1 OFF
2 N/A
3 ON
4 OFF
DIP Switch Settings—High Power—802.3at Compliant
DIP Switch Setting
1 ON
2 N/A
3 OFF
4 ON
a. If set to high power, the unit will not power ON with 802.3af compliant switch. You must use a
power injector in this mode (CyberData Part Number 011124).
conforms to IEEE 802.3at draft 3.0.
DIP Switch Setting
2 OFF
2 ON
© 2016, CyberData Corporation, ALL RIGHTS RESERVED
green in low power mode and a steady blue during high power
Sets PoE for 802.3af class.
Not applicable for power setting.
Switch mode current set to LOW.
Low gain amplifier setting.
a
Description
Sets PoE for 802.3at class.
Not applicable for power setting.
Switch mode current set to HIGH.
Force high gain amplifier.
High power PoE mode
DIP Switch 2 Settings
Description
Manual Vol. The speaker volume is set manually by the analog
volume trimmer.
Bypass. Bypasses the manual volume control of the analog volume
trimmer and uses the web page volume settings.
930351C Quick Reference
Dimensions and Mounting Template
6.281 [159.54]
Dimensions are in Inches [Millimeters]
10.875 [276.23]
Dimensions are in Inches [Millimeters]
Quick Reference
14.500
[368.30]
4.375
[111.13]
Cable Grommets (3 PLCS)
930351C © 2016, CyberData Corporation, ALL RIGHTS RESERVED
7.938
[201.63]