Releasing The Carrier From The Base - Evenflo Nurture Owner's Manual

Placing the Carrier in the Base (cont.)
3
Squeeze both handle releases and move the handle until
it locks into place.
the following positions when traveling in a vehicle:
•
•
Note: When installed directly behind a front vehicle seat, make
sure there is at least 38 mm (1.5 in.) of space between any part
of the carrier and the vehicle seat that is directly in front of the
child's head. If you need additional clearance, place the handle
in Position 1.

Releasing the Carrier from the Base

1
Move the handle to Position 2 (Carry) by squeezing in
on both handle releases and rotating the handle until it
locks into place above the carrier.
2
Pull the base release lever
on the back of the child
restraint outward and lift
the child restraint out.
28
U.S. - Positions 1 or 4
Canada - Position 1
q q
ALWAYS place the handle in one of
ONLY (p. 21)
r r