Installing The Convenience Base With The Lower Anchor Connector Assembly System - Evenflo Nurture Owner's Manual

Installing the Convenience Base
with the Lower Anchor Connector
WARNING!
• This lower anchor connector assembly system is
intended to be used
instructions. Serious injury or death may result from
misuse.
• In addition to these instructions, read and follow
your vehicle owner's manual regarding installation
of the child restraint and LATCH. If there is a
discrepancy, follow your vehicle owner's manual.
• ONLY use for securing convenience base to vehicle
lower anchor bars.
• NEVER
one vehicle lower anchor bar.
NEVER
•
lower anchor connector. Using both together can
cause slack in a sudden stop or crash.
• When not in use, the lower anchor connectors
should be securely stored in the storage area located
in the convenience base (see page 42). Keep out
of reach of children.
• ALWAYS
are attached to the vehicle lower anchor bars by
pulling hard on the lower anchor connectors. If
they are not attached, the lower anchor connector
assembly will not secure your child restraint. Serious
injury or death may result.
• DO NOT
than 2.5 cm (1 in.) side-to-side or front to back at
the vehicle belt path. Serious injury or death may
result from poor installation. If you cannot tightly
secure the child restraint, try again or move it to
another location.
• This child restraint
vehicle.
• The carrier
Check by lifting up on the carrier.
• NEVER
position.
attach two lower anchor connector hooks to
use the vehicle seat belts when using the
be sure that the lower anchor connectors
use this child restraint if it moves more
MUST
MUST be locked firmly into the base.
use this child restraint in the forward-facing
Assembly System
DEATH or SERIOUS
INJURY can occur.
ONLY as described in these
face the rear of the
23