Setting Up The System Smtp Options; Setting Up The System Pop3 Options - NEC SV8100 Programming Manual

6.2 Setting Up the System SMTP Options

Enable SMTP Email Delivery System Wide
47-18-01
Set SMTP Server Name
47-18-02
Set SMTP Server port, default is 25
47-18-03
If required by the email server, enable encryption
47-18-04
Set SMTP Server login user name
47-18-05
Set SMTP Server login password
47-18-06
Set system wide send from Email Address
47-18-07
Set system wide reply to Email Address. This is not a valid email address it is just used
47-18-08
in the email sent to the destination address.
Note: Google requires the Username be the entire email address, this applies to SMTP and POP3. Google
also requires Encryption/SSL be enabled.

6.3 Setting Up the System POP3 Options

Set POP3 Server Name
47-19-01
Set POP3 Server port, default is 110
47-19-02
If required by the email server, enable encryption
47-19-03
Set SMTP Server login user name
47-19-04
Set SMTP Server login password
47-19-05
SV8100 VM8000 InMail Programming Guide
Rev 8
9