Secabo TB7 Operating Manual page 7

Operation of the controller
Initial setup on first power-up
When the HPC01 controller is switched on for the first time, the language selection
appears first. Select the language suitable for you by turning the rotary control to the
desired language and confirm by pressing .
Now select the desired unit for temperature - °C or °F - by turning the rotary control to the
desired unit and confirm with pressing .
This initial setup will no longer be displayed when the TB7 is switched on in the future.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com
Area for time setting and activity indicator of the pre-press feature
(irrelevant for the TB7, time is controlled by the heat press)
Icon for the Bluetooth connection
is controlled by the heat press)
General indicator for fault or error
Area for temperature indicator for target temperature and actual
temperature
Indicator: Heat plate's heating active
Indicator: Press is done heating up
Indicator: Press is currently heating up or cooling down. If below
the set temperature, up arrow will flash.
Indicator for management of memory slots
Counter for counting the performed press operations
for the TB7, time is controlled by the heat press)
(irrelevant for the TB7, time
(irrelevant