Table of Contents
Advertisement
until the values and symbols flash briefly. The values are now both, saved and loaded,
no longer flashes, the memory mode has been exited.
Setting tier:
.
Press
You generally navigate through the setting tiers according to the following scheme:
● Rotate knob - scroll through the settings.
● Press knob - dive into current setting.
● Rotate knob - choose values within the setting.
● Press knob - store value and exit from the setting.
● You may press
subordinate tier.
The following eight menu items are available in the setting tier.
1. Auto Prepress (irrelevant for the TB7, time is controlled by the heat press)
○ Enable / Disable a permanent pre-pressing.
2. Bluetooth (for TB7 please deactivate/ do not use, connection via heat press)
○ Enable / Disable Bluetooth.
3. Bluetooth PIN (for TB7 please deactivate/ do not use)
○ You can use the rotary knob to save your individual PIN, which the app will
then prompt you to enter. The default PIN from factory is 255, which is
automatically recognized and used by the app.
4. Warning signal (irrelevant for the TB7, time is controlled by the heat press)
○ Enable / Disable the warning signal before opening the press.
5. Sleep Mode
○ Setting the time interval in minutes, after which the press enters the Sleep
Mode.
○ In addition, the temperature the press should be cooled down to when in
Sleep Mode can also be set.
○ To completely disable Sleep Mode, set the time value to "0".
○ The active Sleep Mode can be exited at any time by pressing any button or
by actuating the press lever. The press will then restore the previously set
parameters.
6. Auto Off
○ Setting the time interval in minutes, after which the press completely turns off
the heating.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany mail@secabo.com www.secabo.com
to return to the parent tier if no action is to be taken in the
Advertisement
Table of Contents
