Load-Bearing Foundation; Floor Plate - SCAN 66 Assembly And Instruction Manual

LOAD-BEARING FOUNDATION

All items in our product range come under the category of lightweight fireplaces and stoves and do not normally require any rein-
forcement of the beam structure. They can be positioned on ordinary beams/floor.
You should of course make sure that the foundation on which the stove is positioned can indeed support the weight of the stove
and, where applicable, a steel chimney, if you have opted for this solution. In case of doubt about the carrying capacity of the
floor, please consult a building expert.

FLOOR PLATE

(ACCESSORY)
If you are placing the stove on a flammable floor, you must comply with the national and local regulations on the size of any
non-flammable subsurface required to cover the floor around the stove.
Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your stove.
The floor plate's function is to protect the floor and flammable material against any sparks that may occur. A floor plate can be
made of steel or glass, but the stove can also be erected on clinker concrete, natural stone or similar materials.
This Scan wood-burning stove has an integrated floor plate at the bottom and can thus be erected directly on flammable
material without the need for further protection underneath the stove.
Small shaped floor plate
in glass or steel
(Suitable for corner installation)
gulvplader
EMNE:
26
AREAL:
Scan 66
NAVN:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 66\90066059.idw
STI:
N/A
DATO: 10-07-2014
VÆGT:
N/A
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
gulvplader
Large shaped floor plate
EMNE:
in glass or steel
AREAL:
90066059
TG.NR:
HMS
SIGN:
N/A 10-07-2014
VÆGT: DATO:
N/A
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
90066059
TG.NR:
HMS
SIGN: