SCAN 66 Assembly And Instruction Manual page 19

MOUNTING OF WALL-HUNG MODEL
Mount the rear plate loosely; it is not to be fixed, until
after the wall fitting has been mounted
Mount the bottom plate on the existing four screws
Scan 66
NAVN: EMNE:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 66\90066050.idw
STI:
vægbeslag
Scan 66
NAVN: EMNE:
MATERIALE:
DIMENSION:
C:\Working Folder\Designs\Scan 66\90066044.idw
STI:
A ( 1 : 2 )
vægbeslag
N/A
VÆGT: DATO:
N/A
AREAL:
N/A
VÆGT: DATO:
N/A
AREAL: Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
5
Let the rails glide down through the hole along the
bottom plate
6
90066050
TG.NR:
04-03-2019 KEN
SIGN:
Krog Iversen & Co A/S
Mount the four screws loosely in the rear plate again,
DK-5492 Vissenbjerg©
now with the wall fitting in between.
Screw the rails and the bottom plate together in the sides.
Scan 66
NAVN:
Tighten the four bottom screws.
MATERIALE:
Tighten up all screws
DIMENSION:
C:\Working Folder\Designs\Scan 66\90066045.idw
STI:
TG.NR: 90066044
04-03-2019 KEN
SIGN:
Scan 66
NAVN:
vægbeslag
EMNE:
N/A
VÆGT:
N/A
AREAL:
vægbeslag
EMNE:
7
8
90066045
TG.NR:
KEN
DATO: 04-03-2019 SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
19
TG.NR: 90066046