Minimum Measured Peak Value At Input 2 [21]; Maximum Measured Peak Value At Input 2 [22]; Minimum Transmitter Electronics Temperature [23]; Maximum Transmitter Electronics Temperature [24] - Siemens SITRANS TS Series Operating Instructions Manual

8.3.20

Minimum measured peak value at Input 2 [21]

Shows the minimum measured peak value at input 2.
Indication on the dis‐
play
8.3.21

Maximum measured peak value at Input 2 [22]

Shows the maximum measured peak value at input 2.
Indication on the dis‐
play
8.3.22

Minimum transmitter electronics temperature [23]

Shows the minimum measured transmitter electronics temperature.
Indication on the dis‐
play
8.3.23

Maximum transmitter electronics temperature [24]

Shows the maximum measured transmitter electronics temperature.
Indication on the dis‐
play
8.3.24

Button lock [25]

Enables the button lock. You can continue to operate the device using remote operation.
Setting range:
Factory setting:
SITRANS TS100/TS200/TS300/TS500/TSinsert/TSthermowell
Operating Instructions, 08/2020, A5E47810090-AA
8.3 Parameter assignment over device with display
MIN INPUT 2
MAX INPUT 2
MIN ETEMP
MAX ETEMP
ON Button lock enabled
OFF Button lock disabled
OFF
Parameter assignment
93