Document History; Product Compatibility Th320/420; Checking The Consignment - Siemens SITRANS TS Series Operating Instructions Manual

Introduction

1.6 Checking the consignment

1.4

Document history

The overview below summarizes the most important changes in the documentation when
compared to the previous edition.
Edition
08/2020
1.5

Product compatibility TH320/420

The following table describes the compatibility between the edition of this manual, the device
version, the engineering system and the associated EDD.
Manual Comments
edition
08/2020 New device fea‐
tures
1.6 Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
Note
Bending of the sensor during transport
Sensors that are delivered without conduit can be bent during transport. This bending does not
affect the quality of the sensor. The mineral insulated cables used for SITRANS TS are bendable.
• Bend the sensor into the required position before you install it. When bending the sensor,
note the bending radius of ≥ 24 mm and the length NBL of 60 mm at the tip that is not
bendable.
10
Comment
First edition
Device version
HART 7
TH320/420: 01.02.xx or higher
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
• Do not use damaged or incomplete devices.
Compatible version of device integration package
SIMATIC PDM V9.1
AMS Device Manager V13.3
DTM
Field Communicator FC
375/475
SITRANS TS100/TS200/TS300/TS500/TSinsert/TSthermowell
Operating Instructions, 08/2020, A5E47810090-AA
EDD: 01.00.00 or higher
EDD: 01.00.01 or higher
EDD: 01.00.01 or higher
EDD: 01.00.01 or higher