Calibration Of The Weighing Device - Sulky Burel X40+ ISOBUS Technician's Operating Manual

5
+ +
-
C1
The weighing device allows a tolerance margin of 3%. If you notice a weight diff erence between the control unit information and the real
weight, you can calibrate the weighing device sensor. To calibrate the weighing device sensor follow the procedure below. In order to be
able to calibrate the sensor, load a known weight into the hopper. (The weight must be a minimum of 1000 kg).
The reference weight must be accurate in order to obtain a good result.
On the universal terminal, access the
Select "Calibration pesée" (Weight calibration)
Enter the PIN code 1234 and confi rm.
Enter the actual weight
The software calculates the error percentage.
Confi rm the calibration with the key
Press ESC and return to the
The weighing device is calibrated
N : T D
AME RAINING EPARTMENT
R : T '
EFERENCE ECHNICIAN S
C
ALIBRATION
OF THE WEIGHING DEVICE
ADVANCED SETTINGS
and select the corresponding fi eld
HOME page
O M X40+-X50+ ISOBUS
PERATING ANUAL
menu
D : 2017
ATE
P :
13 / 59
AGE
I 03
ND