Ordering Information; Environmental Specifications; Physical Characteristics - Allied Telesis AT-MC101XL Datasheet

MC10x series | Fast Ethernet Media Converters
Port Type Cable Optical
(Connector) Distance Frequency
100FX MMF (2km) 2km
100FX SMF (15km) 15km
100FX SMF (40km) 40km
Link Test
The link test is a fast and easy way for you to test the
connections between the media converter ports and the
end-nodes that are connected to the ports. If a network
problem occurs, you can perform a link test to
determine which port is experiencing a problem, and be
able to focus your troubleshooting efforts on the cable
or end-node where the problem resides.
MissingLink TM
The MissingLink TM feature enables the two ports on the
media converter to pass the 'Link' status of their
connections to each other. When the media converter
detects a loss of connection to an end-node, the media
converter shuts down the connection to the other port,
thus notifying the end-node that the connection has
been lost.
Technical Specifications
Status Indicators
Front Panel
Power Indicates power is applied to the
converter
Link (2) Indicates a valid receive link exists
Activity (2) Indicates TX/RX on the port
FDX Indicates full-duplex operation
ML Indictaes MissingLink
Switches
ML - Link Test Enable MissingLink TM
A/N Enable Auto-negotiation
Packet Transmission Characteristics
Round Trip Delay 0.4µs Maximum
Bit Error Rate (BER) <10-12
Twisted Pair Interface
Min. Typical
UTP Differential
Output Voltage 950mv 980mv
Overshoot Voltage 4%
Single Amplitude
Symmetry 0.98 1.0062
Rise and Fall Time
Rise 3.0ns 4.6ns
Fall 3.0ns 4.2ns
Rise and Fall Time
Symmetry 0.4ns 0.5ns
USA Headquarters | 19800 North Creek Parkway
European Headquarters | Via Motta 24
Asia-Pacific Headquarters | 11 Tai Seng Link
www.alliedtelesis.com
© 2007 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
Launch Power (dBm)
Max. Avg. Min.
1310nm -14.0 -16.8 -19.0
1310nm -8.0 -11.5 -15.0
1310nm 0.0 -3.0 -5.0
Power Characteristics
External Power Supply
Input Supply Voltage
Max Current
Power Consumption

Environmental Specifications

Operating Temp
Storage Temp.
Relative Humidity
Operating Altitude
RoHS Compliant

Physical Characteristics

Dimensions:
(W x D x H)
Weight:
Electrical/Mechanical Approvals
EMC
Safety compliant
TM enabled
Max.
1050mv
5%
1.02
5.0ns
5.0ns
| Suite 200 |
| 6830 Chiasso | Switzerland
| Singapore | 534182
Receive Power (dBm)
Min. Typical
Saturation
Sensitivity Sensitivity
-31.8 -34.5 -14.0
-31.0 -31.0 -8.0
-35.0 -38.0 0.0
120V AC, 60Hz (US model)
240V AC, 50Hz
(European models)
12vDC
500mA
6W
0°C to 40°C
(32°F to 104°F)
–20°C to 80°C
5% to 95% non-condensing
0 to 10,000 feet
10.5cm x 9.5cm x 2.5cm
(4.12" x 3.75" x 1.0")
294g (10.4oz)
FCC Class B
UL-Cul, CSA/CSA, NRTL,
TUV, CE compliant
Bothell | WA 98011 | USA | T: +1 800 424 4284
| T: +41 91 69769.00 | F: +41 91 69769.11
| T: +65 6383 3832 | F: +65 6383 3830

Ordering Information

AT-MC101XL-xx
UTP to multi-mode ST (2km) fiber
AT-MC102XL-xx
UTP to multi-mode SC (2km) fiber
AT-MC103XL-xx
UTP to single-mode SC (15km) fiber
AT-MC103LH-xx
UTP to single-mode long-haul SC (40km) fiber
Where xx = 10 (US power adapter)
20 (European power adapter)
30 (UK power adapter)
40 (Australian power adapter)
Associated Products
AT-TRAY1
Rack-mounting tray for one Media Converter
AT-TRAY4
Rack-mounting tray for up to four Media Converters
AT-WLMT
Wall-mount bracket for one Media Converter
AT-MCR12
12 slot AC/DC powered chassis for Media Converters
| F: +1 425 481 3895
617-00275-00 Rev G