Allied Telesis AT-MC101XL Datasheet

Datasheet | Media Converters
MC10x series
Fast Ethernet Media Converters
AT -MC101XL
TX to FX Fast Ethernet media converter with
multi-mode ST fiber connectors
AT -MC102XL
TX to FX Fast Ethernet media converter with
multi-mode SC fiber connectors
AT -MC103XL
TX to FX Fast Ethernet media converter with
single-mode 15km SC fiber connectors
AT -MC103LH
TX to FX Fast Ethernet media converter with
single-mode 40km SC fiber connectors
Fiber Connections
The Allied Telesis range of Fast Ethernet Media
converters provides a complete family of
conversion devices, allowing users to extend the
size of UTP networks with the use of fiber
cabling. Supporting both SC and ST fiber
connectors, these converters can be used to
extend networks with up to 2km of multi-mode
fiber or 40km of single-mode fiber.
Auto-Negotiation and MissingLink™
The MissingLink™ feature enables the fiber
optic ports on the media converter to pass the
'Link' status of their connections to each other.
When the media converter detects a problem
with one of the ports, such as the loss of
connection to an end-node, the media
converter shuts down the connection to the
other port, thus notifying the node that the
connection has been lost.
Allied Telesis
Simple Installation
All the media converters feature Auto
MDI/MDI-X, allowing the converter to be
connected to either a PC, hub or switch with a
simple UTP cable.The media converters also
allow the installer to test the integrity of fiber
connection, by forcing the converters to
communicate over the fiber cable.This 'Link Test'
feature allows installers to check for cable faults
without the need for expensive fiber optic test
equipment.
Standalone or Rack-mounted
Each small media converter is powered by an
external power supply unit for use in standalone
applications. Where multiple media converters
are being used, up to 12 standalone devices can
be inserted into a low-cost rack-mount chassis,
allowing all the converters to be powered by a
single internal power supply. In critical
applications, a second load sharing internal
power supply can be installed into the rack-
mount chassis.
Hassle Free Support
Allied Telesis Fast Ethernet media converters
offer free technical support, ensuring trouble-
free installation.
Key Features
• Half and full-duplex operation
• Transparent to IEEE 802.1Q packets
• Rack-mountable using optional
AT-MCR12, AT-TRAY4 or AT-TRAY1 chassis
• Wall-mountable using AT-WLMT
• Auto MDI/MDI-X
• MissingLink™
• Link Test
• RoHS Compliant
www.alliedtelesis.com