Table of Contents
Advertisement
IP Camera
The monitor can switch to IP CCTV camera video during a conversation. This function allows
to configure IP CCTV cameras using RTSP protocol to be displayed as an auxiliary camera to
provide different view angles from the door or related areas.
NUMBER OF CAMS: IP camera Number. Up to 4 different cameras.
CAMERA 1: IP camera name.
URL: rtsp://user:password@ip address of ip camera.
User and password: for cameras that require a username and password for connection, these
fields are optional.
Depending on the brand/model of the camera, it is possible that the format of this URL may be
different. See data sheet of the corresponding camera.
SIP Settings
ENABLE SIP: Enable or disable sip function.
SIP SERVER: SIP server IP address.
DOMAIN: Sip server domain.
OUTBOUND: Some servers are used when NAT is active on the router.
STUN IP: Audio and video NAT traversing public network server IP.
STUN PORT: The port of audio and video NAT traversing public network server.
H.264: Video coding parameters.
SIP USER: The username of sip account.
SIP PASS: The password of sip account.
CONVERSATION: Conversation duration, 120s, 300s, 600s, 1200s and 1800s optional.
RING TIME: Ring time, 35s, 45s, 60s, 90s and 120s optional.
Page 17
Advertisement
Table of Contents
