Troubleshooting; Initial Diagnosis - Sony SRG-300SE Service Manual

3-1. Initial Diagnosis

Turn on the power of this unit.
Do the POWER indicator and
NETWORK indicator on the
front of this unit light up?
Does this unit perform the PAN/
TILT initialization operation?
(approx. 2 minutes after
turning on the power)
Can the network setting and
connection be performed?
Can the image be displayed
by accessing this unit from
PC browser?
Can the PAN/TILT operation
be performed normally by
accessing this unit from
PC browser?
Mic and line input sound is
not reproduced normally.
Go to "3-7. Audio Trouble". Go to "3-8. Serial Connection
Trouble".
SRG-300SE/301SE
Section 3

Troubleshooting

No
Go to "3-2. Power Trouble".
Yes
No
Go to "3-3. System Startup Trouble".
Yes
No
Go to "3-4. Network Trouble".
Yes
No
Go to "3-5. IP Image Trouble".
Yes
No
Go to "3-6. PAN/TILT Trouble".
Yes
This unit cannot be
operated via the remote
controller.
Go to "3-9. SDI Image Trouble". Go to "3-10. Image Quality
Image is not output
normally from the SDI Image quality is abnormal.
connector.
Trouble".
3-1 (E)