Sony SRG-300SE Service Manual page 36

3. Click the [Property] button.
The Local Area Connection Properties screen is displayed.
4. Select "Internet protocol version 4 (TCP/IPv4)", and then click the [Properties] button.
The Internet Protocol Version 4 (TCP/IPv4) Properties screen is displayed.
5. Set the IP address and subnet mask as follows.
IP address: 192.168.0.**
Subnet mask: 255.255.255.0
n
In "**", set the value other than the IP address of this unit in the range from 1 to 254. (Set the
address that does not conflict with other connected devices.)
6. Click the [OK] button.
7. Click the [OK] button on the property screen of the local area connection.
2-4 (E)
Internet Protocol Version 4 (TCP/IPv4)
[Properties] button
Check the radio button.
IP address and Subnet mask
[OK] button
SRG-300SE/301SE