Troubleshooting - Sony HANDYCAM DCR-TRV361 Operation Manual

Troubleshooting
Troubleshooting
If you run into any problem using your
camcorder, use the following table to
troubleshoot the problem, if the problem
persists, remove the power source and
contact your Sony dealer.
If"C:V1VI:V1VI" is displayed on the LCD
screen or the viewfinder, the self-diagnosis
display function is activated. See page 110
for details.
The power does not turn on. • Tile baltery pack is discharged, running low, or nol allached _o tile
camcorder.
-) Aliach a charged battery pack to the camcorder. (p. !4)
-)Use lhe AC Adaptor to connect to lhe wall outlei. (p. 17)
The camcorder does not operale even -)Disconnect the AC Adaptor from a wall outlet or remove the baltery
when _he power is set to on. pack, lhen reconnect it after about I minute. If the functions sdl! do not
work, press the RESET breton using a sharp-pointed object. (If you press
the RESET bul_on, all se¢lings including the clock setting (except the
Personal Menu ilems) are reset.)
The supplied Remote Commander ") get [REMOTE CTRL 1 on the _ (STANDARD SET) menu to [ON].
does not function. (p. 80)
-) Insert a battery inlo the baltery holder with the + polarities correctly
matching the + marks. If this slill does not solve the problem, insert a
new ballery since the battery is dead. (p. 129)
")Remove any obstructions between the Remote Commander and the
renlole sensor.
,.*_.continued
Troubleshooting 103