Table of Contents
Advertisement
E-Stop Safety Module
Important
Banner Engineering Corp. has made every effort to provide complete application, installation, operation, and maintenance instructions.
In addition, any questions regarding the use or installation of this Banner Emergency Stop Safety Module should be directed to the
factory applications department at the telephone numbers or address shown on back cover.
The user shall ensure that all machine operators, maintenance personnel, electricians, and supervisors are thoroughly familiar with
and understand all instructions regarding the installation, maintenance, and use of this Emergency Stop Safety Module, and with the
machinery it controls.
The user and any personnel involved with the installation and use of this model Emergency Stop Safety Module must be thoroughly
familiar with all applicable ANSI/NFPA standards. The standards, listed below, directly address the use of emergency stop systems.
Banner Engineering Corp. makes no claim regarding a specific recommendation of any organization, the accuracy or effectiveness of any
information provided, or the appropriateness of the provided information for a specific application.
The user has the responsibility to ensure that all local, state, and national laws, rules, codes, and regulations relating to the use of this
Emergency Stop Safety Module in any particular application are satisfied. Extreme care is urged that all legal requirements have been
met and that all installation and maintenance instructions contained in this manual are followed.
U. S. Standards Applicable to Use of Emergency Stop Safety Modules
ANSI B11
Standards for Machine Tools "Safety Requirements for the Construction, Care and Use"
Available from:
NFPA 79
"Electrical Standard for Industrial Machinery (1997)"
Available from:
ANSI/RIA R15.06
"Safety Requirements for Industrial Robots and Robot Systems"
Available from:
European Standards Applicable to Use of Emergency Stop Safety Modules
ISO/TR 12100-1 & -2 (EN 292-1 & -2)
EN 954-1
IEC/EN 60204-1
EN 418
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
– Models ES-UA-5A and ES-VA-5A
...
read this page before proceeding!
Safety Director
AMT – The Association for Manufacturing Technology
7901 Westpark Drive
McLean, VA 22102
Tel.: 703-893-2900
National Fire Protection Association
1 Batterymarch Park, P.O. Box 9101
Quincy, MA 02269-9101
Tel.: 800-344-3555
Robotic Industries Association
900 Victors Way, P.O. Box 3724
Ann Arbor, MI 48106
Tel.: 734-994-6088
"Safety of Machinery – Basic Concepts, General Principles for Design
Part 1: Basic Terminology, Methodology, and
Part 2: Technical Principals and Specifications"
"Safety of Machines: Safety Related Parts of Control Systems: Part 1 General Principles for Design"
"Electrical Equipment of Machines: Part 1: General Requirements"
Also, request a type "C" standard for your specific machinery.
"Safety of Machinery – Emergency Stop Equipment Functional Aspects, Principles for Design"
Available from: Global Engineering Documents
15 Inverness Way East
Englewood, CO 80112-5704
Tel.: 800-854-7179
Advertisement
Table of Contents
