ECC500
User Manual
Step 5 Tighten the four expansion bolts for the AI/DI module using a socket wrench, as shown in
Figure
Figure 4-7 Wall-mounted AI/DI module
----End
4.3 Connecting Cables
Connecting Ground Cables
After an ECC500 or an AI/DI module is installed, connect a ground cable to it and connect the
other end of the ground cable to the cabinet or site ground point.
cable connections for the ECC500 and AI/DI module.
Figure 4-8 Connecting ground cables
Connecting to an IP Network
Figure 4-9
Issue 03 (2020-01-06)
4-7.
shows the cable connection between the ECC500 and an IP network.
Copyright © Huawei Technologies Co., Ltd.
4 Installation and Commissioning
Figure 4-8
shows the ground
34