Optional) Installing A Rack-Mounted Ai/Di Module - Huawei ECC500 User Manual

ECC500
User Manual
Figure 4-4 Wall-mounted ECC500
----End

4.2.3 (Optional) Installing a Rack-mounted AI/DI Module

Prerequisites


Context


Procedure
Step 1 Use a floating nut mounting bar to install floating nuts (one on each site) into the mounting
holes in the posts of the rack, as shown in
Issue 03 (2020-01-06)
The installation position in the rack has been determined.
The following tools are available: Phillips screwdriver, flat-head screwdriver, and rubber
mallet.
When installing a rack-mounted AI/DI module, choose appropriate long mounting ears
delivered with the AI/DI module.
A flat-head screwdriver can be used as a floating nut mounting bar.
Copyright © Huawei Technologies Co., Ltd.
4 Installation and Commissioning
Figure 4-5.
32