Adding A Ups2000G - Huawei ECC500 User Manual

ECC500
User Manual
To log in to the ECC500 WebUI, use a browser of Internet Explorer 8.0 or later, FireFox, or
Chrome. Internet Explorer 8.0, FireFox32.0, and Chrome37.0.2062.103 m are recommended.
If the GPRS function (SMS alarm notification) of the ECC500 is used, pull out the GPRS
expansion card, insert a SIM card, and reinstall the GPRS expansion card.
how to install and remove a SIM card.

5.2.2 Adding a UPS2000G

Prerequisites



Context
After a UPS2000G is connected to the ECC500, add the UPS2000G on the ECC500 WebUI.
Procedure
Step 1 On a PC which is in the same IP address segment as the ECC500, enter
https://XX.XX.XX.XX in the address box, and press Enter.
Step 2 (Optional) Install a network security certificate if a certificate problem message is displayed.
For details, see
Figure 5-6 Security certificate problem message
Issue 03 (2020-01-06)
A GSM SIM card (2G) should be prepared by the user.
A UPS2000G is connected to the ECC500. The UPS2000G and ECC500 have been
powered on.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
XX.XX.XX.XX indicates the ECC500 IP address.
7.2 How Can I Install a Network Security
This operation is performed on Windows 7. If another operating system is used, perform this operation
based on actual conditions.
Copyright © Huawei Technologies Co., Ltd.
5 UI Description
Figure 3-8
Certificate?.
shows
51