Table of Contents
Advertisement
1. Install flanges on the return air vent.
2.
Install the return air vent.
6
Connecting Cables
6.1
Connecting Power Cables and Signal Cables
1. All power cables and ground cables must
comply with local national standards.
2. After connecting power cables and checking
cable connections, use sealing putty to fill in
the gap between the cables and the cabinet
(as shown in the right figure), and the sealing
putty can be obtained from the fitting bag.
(1) Paper protective film
10
(2) Sealing putty (mandatory)
Advertisement
Table of Contents
