Au4) Auxiliary Frame: Power Stand-By/Impl - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.4.8.4 (AU4) AUXILIARY FRAME: POWER STAND-BY/IMPL

----- AUXILIARY FRAME: POWER STAND-BY/IMPL -----
CL-0
RA
Figure 20: AUXILIARY FRAME: POWER STAND-BY/IMPL screen
By making an entry in this frame and pressing the ENTER key, you can switch the server off or re-initialize it.
FUNCTION => The following function is selected after the corresponding number has been entered:
POWER switches the Server Unit off; order: first devices connected to the PCI (Power Control
1
STAND- Interface), then the servers (for further information on this see "Switching the SE700 / SE500
BY on and off" in the Basic Operating Manual [ ])
2 IMPL executes IMPL
After you have selected a function and pressed the ENTER key, the following prompt will appear:
***********************************
*
* ARE YOU SURE ? (ENTER Y OR N) N *
*
***********************************
!
CAUTION!
POWER STAND-BY or IMPL may not be executed during system operation! If this instruction is not
heeded, BS2000 will be aborted!
> Press the Y and ENTER keys to switch off the system or to execute an IMPL, or the N and ENTER keys
to cancel the procedure.
FUNCTION=>
*1 POWER STAND-BY
*2 IMPL
CPU-0 CHP-0
*
*
E90L01G
RUN
[]-[]00
1
51