Fujitsu BS2000 SE Series Operating Manual page 21

Server Unit /390
PF3 RETURN
PF4 PF4
PF5 PF5
PF6 Can/Erase
PF7 Page up
PF8 Page down
PF9 PF9
PF10 PF10
PF11 PF11
PF12 PF12
PF13 RECALL
PF14 PF14
PF15 PF15
PF16 PF16
PF17 PF17
PF18 Step
PF19 PF19
PF20
PF21 START
PF22 PF22
PF23 ModSel
ESC F3 Return
ESC F4
ESC F5
ESC F6 Cancel/
Erase Input
ESC F7 Page up
ESC F8 Page down
ESC F9
ESC F10
ESC SHIFT F1
ESC SHIFT F2
ESC SHIFT F3 Recall
ESC SHIFT F4
ESC SHIFT F5
ESC SHIFT F6 Change CPU
ESC SHIFT F7
ESC SHIFT F8 Step
ESC SHIFT F9 ARMSS
management
ESC SHIFT Stop
F10
SHIFT F5 Start
SHIFT F6
SHIFT F7 Mode Select
Switches to the preceding frame.
Frame-specific function is performed.
Frame-specific function is performed.
Command or input data is deleted.
The previous screen contents are displayed
The next screen contents are displayed
Frame-specific function is performed.
Frame-specific function is performed.
Frame-specific function is performed.
Frame-specific function is performed.
Previous SVP commands are displayed in the
command line. They can then be executed again
with changed operands.
Frame-specific function is performed.
Frame-specific function is performed.
Selects the CPU for which the subsequent
commands are to apply.
This CPU is then connected logically with the SVP.
not assigned
Executes the next command if the server is in Single
Cycle Instruction Mode
Changes the user rights of an existing ARMSS
connection
Only effective in CE mode:
Stops the selected CPU
Starts the selected CPU
not assigned
– Switches to the MODE SELECTION FRAME
– Erases WRITE-CONSOLE message on the screen
(e.g. SHUTDOWN COMPLETED)
– Erases BEL display in screen line 25
21