Ma) Manual Operation Frame - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.4.4 (MA) MANUAL OPERATION FRAME

Figure 11: MANUAL OPERATION FRAME screen
By making an entry in this frame and pressing the ENTER key, you can perform various manual operations.
Instructions on this frame are only executed when the CPU has been stopped (see message in frame line 23). The
CPU status is displayed in line 22.
> Selection of a CPU by clicking on PF16
> Stopping of the selected CPU (see (ML) MODE SELECTION FRAME
FUNCTION => The following function is executed after the corresponding character has been entered and
the ENTER key has been pressed:
1 RATE CONTROL
2 ADRS COMPARE
STOP3
3 FIRM DUMP
4 HSA DUMP
X EXECUTE
defines program operation
sets mode for compare address stop
outputs a firmware dump to tape, MTC or an emulated tape device (for
Customer Support only)
executes HSA dump (for Customer Support only) (HSA Hardware/Software
Area)
executes functions 1 - 4
"(ML) MODE SELECTION FRAME" )
37