Fujitsu BS2000 SE Series Operating Manual page 72

Server Unit /390
Storing settings
After you have checked all the settings, click on PF9 to store them and to switch to PROGRAM LOAD FRAME:
DETAIL-1.
The new setting is displayed under VM MODE: in the DETAIL-2 STATUS field. VM MODE: AVM/EX is now
displayed. The firmware is relocated before the IPL is executed.
By filling PROGRAM LOAD FRAME: DETAIL-1 and pressing ENTER you can execute the IPL (see "Executing
IPL in PROGRAM LOAD FRAME: DETAIL-1" ).
Make sure you fill in the PARMS field correctly.
72