Au5) Auxiliary Frame: Load Preset1 - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.4.8.5 (AU5) AUXILIARY FRAME: LOAD PRESET1

----- AUXILIARY FRAME: LOAD PRESET1 -----
-START MODE-
==> 1
>1 START AUTO
*2 START FAST
*3 START DIAL
*4 START
-INITIAL FRAME-
==> 2
*1 LOAD FRAME(BASIC)
>2 LOAD FRAME(DETAIL)
CL-0
RA
Figure 21: AUXILIARY FRAME: LOAD PRESET1 screen
You can predefine the execution of an IPL by making an entry in this frame and clicking on PF12.
START MODE ==> Predefine the loading mode by entering the appropriate number and comment for the
1 START AUTO
2 START FAST
3 START DIAL
4 START
IPL DEVICE Entries in this field specify from which device an IPL should be executed.
1 PRESET Up to four unit addresses can be entered in the input field for PRESET GROUP. The
operating system is loaded from the first device (IPL). In the case of an error, the IPL is
GROUP
executed by the next device listed.
POWER ON IPL
==>
1 ENABLE automatically executes IPL after IMPL
-IPL DEVICE-
1 PRESET GROUP -----------------+
2 CURRENT GROUP --------+
3 UNIT ADDRESS -+
CPU-0 CHP-0
BS2000 loading mode:
for automatic startup
for fast startup
for dialog startup
not used
Here you determine the behavior of the SVP after switching on.
E90L01G
|
+ +
A108 A108 A108
XXXX XXXX
XXXX XXXX
XXXX XXXX
-POWER ON IPL-
==> 2
*1 ENABLE
>2 DISABLE
*PF12 CATALOG
*PF9 GO TO LOAD PRESET-2
RUN
[]-[]00
52