Electrolux EW30MC65PS User & Care Manual page 4

4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR
UNPACKING AND INSTALLATION
IMPORTANT
Read and follow the below instructions and
precautions for unpacking, installing, and
servicing your appliance.
Remove all tape and packaging before using
the appliance. Destroy the carton and plastic
bags after unpacking the appliance. Never
allow children to play with packaging materi-
al. Do not remove the wiring label and other
literature attached to the appliance. Do not
remove model/serial number plate.
Cold temperatures can damage the elec-
tronic control. When using this appliance for
the fi rst time, or when the appliance has not
been used for an extended period of time, be
sure the appliance has been in temperatures
above 32ºF (0ºC) for at least 3 hours before
turning on the power to the appliance.
All materials used in construction of cabi-
nets, enclosures, and supports surrounding
the product must have a temperature rating
above 194°F (90°C).
Never modify or alter the construction of the
appliance by removing the leveling legs,
panels, wire covers, anti-tip brackets/screws,
or any other part of the appliance.
Be sure to have an appropriate foam-type
fi re extinguisher available, visible, and easily
accessible located near the appliance.
GROUNDING INSTRUCTIONS
WARNING
• Avoid fi re hazard or electrical shock.
Failure to follow this warning may cause
serious injury, fi re, or death.
• Avoid fi re hazard or electrical shock. Do
not use an adapter plug, use an exten-
sion cord, or remove grounding prong
from the power cord. Failure to follow
this warning may cause serious injury,
fi re, or death.
Proper Installation—Be sure your appliance is
properly installed and grounded by a quali-
fi ed technician. In the United States, install in
accordance with the National Fuel Gas Code
ANSI Z223.1/NPFA No. 54, latest edition and
National Electrical Code NFPA No. 70 latest
edition, and local electrical code require-
ments. In Canada, install in accordance with
CAN/CGA B149.1 and CAN/CGA B149.2 and
CSA Standard C22.1, Canadian Electrical
code, Part 1-latest editions and local electri-
cal code requirements. Install only per instal-
lation instructions provided in the literature
package for this appliance.
For personal safety, this appliance must be
properly grounded. For maximum safety, the
power cord must be securely connected to
an electrical outlet or junction box that is the
correct voltage, is correctly polarized and
properly grounded, and protected by a cir-
cuit breaker in accordance with local codes.
It is the personal responsibility of the consum-
er to have the appropriate outlet or junction
box with the correct, properly grounded wall
receptacle installed by a qualifi ed electrician.
It is the responsibility and obligation of the
consumer to contact a qualifi ed installer to
assure that the electrical installation is ad-
equate and is in conformance with all local
codes and ordinances.