Canon EOS-1V Service Manual page 61

For the EOS-1V electrical adjustment,
Multiple Tool II or HS-I/F with ROM version
1.1 or later is required.
If you are not using Multiple Tool II or HS-
I/F with ROM version 1.1 or later, the
adjustment software will display the message
shown on the right.
If you use HS-I/F, additional memory will be
necessary. If it does not have additional
memory, the message shown on the right will
appear.
Also, if a camera other than the EOS-1V has
been connected or if the camera ROM version
is incompatible, the adjustment software will
display the message shown on the right.
Part 4: Electrical Adjustments
ERRHSVER
The HS-I/F's ROM version is not 1.1 or later.
This adjustment software requires
ROM version 1.1 of HS-I/F or later.
Press any key to quit.
ERRMEM
The HS-I/F's memory has not been expanded.
The HS-I/F requires additional memory.
To expand the memory,
install expanded memory unit (CY9-7082-002).
Press any key to quit.
ERRCAM
The camera is not an EOS-1V
This adjustment software is compatible
only with the EOS-1V.
Press any key to quit.
ERRCVER
This EOS-1V's ROM version is
This adjustment software is not compatible
with this camera's ROM version.
Press any key to quit.
4-7