Canon EOS-1V Service Manual page 205

Registers and
switches the shoot-
ing mode and
metering mode.
LCD panel display
immediately after
registration.
6
Exposure
Functions
Repeats AEB dur-
ing continuous
7
shooting.
Sets AEB only for
the first two frames.
8
The desired picture-taking mode
(except DEP and bulb), exposure set-
tings (shutter speed, aperture, manual
exposure setting), metering mode, and
exposure compensation amount can
be registered as follows:
q Set the desired picture-taking mode
and exposure settings.
↓
w Press the exposure compensation
button.
↓
e Press the Assist button.
↓
r The box displayed on the frame
counter indicates that the registra-
tion is completed.
While the shutter button is held down,
AEB repeats during continuous shooting
at the current film advance mode.
AEB, which normally takes three frames,
takes only two frames with this P.Fn.
This enables the user to instantly • Depth-of-field AE and bulb cannot
switch to the registered settings to be registered.
suit the front or backlighting condi- • If P.Fn-3 has been set and P.Fn-6
tions. is used to register manual expo-
sure together with a metering
mode different from the one set
with P.Fn-3, the metering mode set
with P.Fn-3 will override the one
registered with P.Fn-6.
• If C.Fn-4-1/3 has been set, press-
ing the Assist button will start
AF/AE.
• If a Custom Function like C.Fn-18
is set to enable the Assist button to
function by itself, the Custom
Function setting will override P.Fn-
6.
• For the registration procedure, first
press the exposure compensation
button, then press the Assist but-
ton. If the Assist button is pressed
first, registration will not occur and
it will revert to the P.Fn-6 setting
step.
• If any item disabled with P.Fn-1, 2,
3, 4, and 5 is set, use the camera
to cancel that Personal Function
temporarily. Then set P.Fn-6.
Afterward when P.Fn-1, 2, 3, 4, or
5 takes effect, items disabled with
P.Fn-1, 2, 3, 4, and 5 that have
been set with P.Fn-6 will remain
effective with P.Fn-6.
• The Programmed Image Control
mode and metering mode cannot
be switched during continuous
shooting.
Effective when you want to repeat
AEB during continuous shooting.
Effective when the third AEB • The exposure scale on the LCD
frame is unnecessary. panel and in the viewfinder will still
display the bracketing amount for
three AEB frames.