Download Print this page

Canon EOS-1V Service Manual page 20

Hide thumbs Also See for EOS-1V:

Advertisement

Part 1: General Information
4-3 Metering range:
4-4 Unsuitable expo-
sure warning:
4-5 Exposure metering: Activated when shutter button is pressed halfway.
4-6 ISO Film Speed
Range:
4-7 Exposure
Compensation:
EV 0-20 in all metering modes (at 20°C with 50mm
f/1.4 lens, ISO 100)
Shutter speed or aperture display blinks at 2 Hz.
* Before shutter release: Metering remains active for 6
sec. after the halfway-depressed shutter button is
released.
* After shutter release: Metering remains active for 2
sec. after the halfway-depressed shutter button is
released.
Automatically set with DX-coded film at ISO 25-5000
or settable manually at ISO 6-6400. Settable in 1/3-
stop increments.
* The manually set ISO film speed and exposure com-
pensation are displayed during film rewind and after
film rewind before the film cartridge is removed.
* With non-DX-coded film, the ISO speed set previous-
ly will blink to indicate that manual setting of ISO is
required.
(1) AEB: Autoexposure bracketing
* Set by pressing the Shooting mode selector and AF
mode button and turning Main Dial. Bracketing
amount: Up to ±3 stops in 1/3-stop increments
* The bracketing sequence is correct exposure, under-
exposure, and overexposure, taken according to the
film advance mode.
If the self-timer is used, the three bracketed shots
will be exposed successively after the self-timer
delay.
Bracketing method of each shooting mode
Shooting Mode
1 Shutter speed-priority AE
2 Aperture-priority AE
3 Depth-of-field AE
4 Program AE
5 Manual
CF-5-0
CF-5-1
* AEB cancellation
AEB is canceled with any of the following: 0 brack-
eting amount, CLEAR, flash ready, bulb, main
switch set to L, lens interchange, film loading and
initial advance, or rewind.
* If the battery is replaced during AEB, AEB will start
from the first shot (correct exposure) again.
(2) Manual exposure compensation
* Turn Quick Control Dial or press exposure compen-
sation button and turn Main Dial. Set up to ±3 stops
in 1/3-stop increments.
(3) (1) and (2) above can be set in combination.
1-18
Bracketing Method
Shutter speed
Aperture

Advertisement

loading