Canon EOS-1V Service Manual page 101

• SI Brightness Adjustment
• The adjustment is very fine, and it is difficult to see the adjusted bright-
ness with the naked eye.
CAUTION
• Stray light will affect the SI brightness. Do the adjustment in a dark place
(with constant lighting).
PURPOSE
To adjust the SI brightness. Normally, this adjustment is not necessary. It is
done only when the user requests the SI to be brighter or darker.
TOOLS
Body cap
PREPARATIONS
1) Attach the body cap to the camera.
2) On the Display Adjustment Menu, select [F2] SI Brightness Adjustment.
ADJUSTMENT PROCEDURE
1) All the SI points will be lit. While look-
ing through the viewfinder, use the
cursor to select the desired brightness
correction (brighter or darker). Then
press Return.
2) Check the resulting brightness after
the adjustment is completed. If it is
OK, press Return. If further adjust-
ment is necessary, press the space
bar.
Part 4: Electrical Adjustments
SI1
SI Adjustment
To obtain clear image,
select compensation with cursor key.
The adjustment value varies from -128 to +127.
Average value is approx. 60.
If too bright, it is recommended to adjust
to the value between -10 to -20.
Press RETURN to make compensation.
To return to Display Adjustment Menu,
press space bar.
Standard default will be weitten if ESC is pressed.
SI2
SI Brightness Adjustment
The current adjustment has been set to
Check the SI brightness.
If this is OK, press Return.
If this is not OK, press the space bar
and do the adjustment again.
4-47
Standard:
Image must be clear
000
Limit
Clearly visible
##