Canon EOS-1V Service Manual page 208

Disables automatic
focusing point
selection.
17
AF Functions
Enables automatic
focusing point
selection when
C.Fn-11-2 has been
18 set.
Sets the shooting
speed of the film
advance modes for
when the Power
Drive Booster is
19
attached.
Film Transport
Functions
Limits the number
of frames exposed
20
during continuous
shooting.
During manual focusing point selection,
this prevents automatic focusing point
selection from being set when the user
tries to select a focusing point beyond a
peripheral focusing point.
With C.Fn-11-2, normally you use the
Quick Control Dial alone to select the
focusing point. When the selection stops
at a peripheral focusing point, automatic
focusing point selection does not take
effect. However, the horizontal focusing
points at the center can be selected and
automatic focusing point selection can be
used as well.
The maximum shooting speed can be set
within the following ranges. Depending
on the power source and AF mode, the
continuous shooting speed you set might
not be attained.
Ultra-high continuous shooting: 8 - 10 fps
High-speed continuous shooting: 4 - 7 fps
Low-speed continuous shooting: 1 - 3 fps
This setting cannot be altered with the
EOS-1V alone.
This enables you to set the maximum
number of frames (1 - 36) to be exposed
during a single burst of continuous shoot-
ing.
This prevents the camera from • During picture-taking with C.Fn-11-
switching to automatic focusing 2, pressing the focusing point
point selection at an inconvenient selector enables automatic focus-
time. Since the focusing point ing point selection.
selection stops at the periphery, it • If automatic focusing point selec-
makes it faster to select a periph- tion is registered before P.Fn-17 is
eral focusing point. set, pressing the Assist button and
focusing point selector enables
automatic focusing point selection.
Effective when you want to use • If P.Fn-17 is also set, P.Fn-17 will
automatic focusing point selection override P.Fn-18 and automatic
while C.Fn-11-2 has been set. focusing point selection will be dis-
abled.
Effective when you want to attain
more stable AI Servo AF continu-
ous shooting or when you set the
continuous shooting speed to suit
the subject's speed.
It is also effective if you want to
set it to the same continuous
shooting speed as the EOS-1N.
Effective when you do not want to
photograph an unwanted scene
that follows.