Canon EOS-1V Service Manual page 16

Part 1: General Information
2-4 Focusing point
selection:
2-5 Active focusing
point indicator:
2-6 Focusing point
registration and
shifting (HP:
Home position):
2-7 AF activation:
2-8 AF operation speed: Same as or faster than the EOS-3.
2-9 In-focus indicators: Focusing point superimposed in viewfinder (cancelable
2-10 AF precision:
2-11 AF working range: EV 0-18 (at ISO 100), according to Canon's testing
During continuous shooting, electronic-ring manual
focusing is enabled during film advance and dis-
abled during exposure (but enabled with PB-E2 +
NP-E2 attached).
(1) Manual selection of focusing point
Horizontal focusing point selection: Focusing point
selector + Main Dial
Vertical focusing point selection: Focusing point
selector + Quick Control Dial
* Focusing point selector pressed → Assist button +
Main Dial
* Focusing point selector + FE lock button pressed →
Hold down the Focusing point selector and turn
Main Dial
(2) Automatic selection of focusing point
* In the One-Shot AF mode: Based on the subject
information obtained by the Area AF focusing points,
the optimum focusing point is selected automatically.
* In the AI Servo AF mode: The center focusing point is
initially selected. If the subject moves to another
focusing point, AI Servo AF will continue to track the
subject.
* If CF-11-2 is set, pressing the focusing point selector
while the shutter button is pressed halfway or com-
pletely will select the focusing point automatically.
(3) Center focusing point selection
* Focusing point selector press → Assist button ON
The focusing point is superimposed in the viewfinder.
Focusing point registration: After selecting the focusing
point, press the Assist button and FEL button (the
center focusing point is the default setting)
Shifting to registered focusing point: Press Assist but-
ton and focusing point selector.
* 45-point and 2-point automatic selection also can be
registered.
AF is activated by pressing the shutter button halfway.
with Custom Function), in-focus indicator (dot), and
electronic beeper (which can be enabled or disabled
with the main switch)
Same as the EOS-1N's
conditions.
1-14
CF-13-3