Table of Contents
Advertisement
Home Automation (WMP) – Fujitsu VRF
TM
Intesis
1. Available commands
This is an informative section displaying all commands available for the WMP communication.
2. TCP Configuration.
This section allows to configure the TCP settings for the WMP communication with the Home Automation system.
•
Port: WMP TCP communication port setting. Default port 3310.
•
Keep Alive. Set the time of inactivity to send a keep Alive message. Default 10 minutes.
4.2.5. Fujitsu VRF configuration
Set parameters for the connection with Fujitsu VRF installation.
In Gateway Configuration section, it is necessary to define the address of the gateway inside the Fujitsu VRF
network. In addition, it is possible to define the temperature scale between Celsius and Fahrenheit.
In Air Units Configuration section, you can do both:
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
Figure 4.3 Intesis MAPS Home Automation configuration tab
Figure 4.4 Intesis MAPS Fujitsu VRF configuration tab
User Manual r1.0 EN
URL
https://www.intesis.com
12 / 22
Advertisement
Table of Contents
Need help?
Do you have a question about the Intesis WMP and is the answer not in the manual?
Questions and answers