Adjustments Before Operation - Aiwa XR-X7 Operating Instructions Manual

ADJUSTMENTS BEFORE OPERATION

TUNER/BAND
f,g
En
POWER 6STANDBY/ON COLOR
DEMO/ECO
Power
Turning the unit on
Press POWER 6 STANDBY/ON (POWER on the remote
control).
Alternatively, press TUNER/BAND, CD or VIDEO/AUX (AUX
on the remote control). Playback will start automatically if a
disc is inserted.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
8
VIDEO/AUX
CD
CLOCK
SHIFT
f,g
aSET
POWER
ENTER
VOLUME/MULTI JOG
Volume
Turn VOLUME/MULTI JOG (press VOLUME (
on the remote control).
Adjust from 0 (minimum) to 49 and MX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 21 or higher, it is
automatically turned down to 20 the next time the unit is turned
on.
To adjust the volume level of the equipment
connected to the VIDEO/AUX IN jacks
Press VIDEO/AUX (AUX on the remote control) to select the
function of external equipment connected to the VIDEO/AUX
IN jacks, then press f or g repeatedly.
The volume level can be adjusted from "AUX MIN"
(minimum), "AUX 1" to "AUX 6", followed by "AUX MAX"
(maximum).
DEMO
If the clock has not been set, "DEMO" appears on the display
when the unit is turned off.
To deactivate the DEMO
While "DEMO" is displayed, press DEMO/ECO. The clock
TUNER/BAND,
flashes. For setting the clock, see page 9.
AUX, CD
ECO mode
ENTER
Reduces power consumption with the following operations.
VOLUME
After clock is set, this unit allows you to regulate its power
(N,M)
consumption by displaying nothing on the display while the
power is off. This is called power economizing mode.
Press DEMO/ECO while the unit is turned off.
Each press of this button changes the display status as follows:
1 Demo display (power economizing mode canceled)
2 Power economizing mode
3 Clock display (power economizing mode canceled)
When power economizing mode is activated
, )
N M
When the unit turns off, "ECO MODE" is displayed for 4
seconds, and everything on the display clears.
Only the red indicator on the POWER button lights to show
that power is being supplied to the unit.
Standby power consumption
When power economizing mode is activated: 1.0 W
When power economizing mode is deactivated: 13 W