Table of Contents
Advertisement
ADJUSTMENTS BEFORE OPERATION
Power
Press POWER 6 STANDBY/ON (POWER on the
remote control) to turn the unit on and off.
Volume
Turn VOLUME/MULTI JOG, or press VOLUME
,
on the remote control.
N
M
Adjust from 0 (minimum) to 30 and MAX (maximum).
•Volume level setting is retained during power-off standby.
If the unit is turned off with the volume set to 21 or more, it
is automatically turned down to 20 the next time the unit is
turned on.
DEMO
If the clock has not been set, "DEMO" appears on the display
when the unit is turned off.
To deactivate the DEMO
While "DEMO" is displayed, press DEMO/ECO/RDS. The
clock flashes. For setting the clock, see page 12.
ECO mode
Reduces power consumption with the following operations.
After clock is set, this unit allows you to regulate its power
consumption by displaying nothing on the display while the
power is off. This is called power economizing mode.
Press DEMO/ECO/RDS while the unit is turned off.
Each press of this button changes the display status as follows:
1 Demo display (power economizing mode cancelled)
2 Power economizing mode
3 Clock display (power economizing mode cancelled)
Pressing a or ENTER turns on the backlight for 4
seconds.
When power economizing mode is activated
When the unit turns off, "ECO MODE" is displayed for 4
seconds, and everything on the display clears.
Only the red indicator on the POWER button lights to show
that power is being supplied to the unit.
Standby power consumption
When power economizing mode is activated: 0.8 W
When power economizing mode is deactivated: 9 W
En
11
Advertisement
Table of Contents
