Adjustments Before Operation - Aiwa XR-M131 Operating Instructions Manual

ADJUSTMENTS BEFORE OPERATION

TAPE, TUNER/BAND,
AUX, CD
POWER
6STANDBY/ON
aSET
QSOUND
3-MODE EQUALIZER
(ROCK, POP, JAZZ)
Power
Turning the unit on
Press POWER 6 STANDBY/ON (POWER on the remote
control).
Alternatively, press TAPE, TUNER/BAND (BAND on the remote
control), AUX or CD. Playback will start automatically if a disc
or tape is loaded.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
s
DISPLAY
VOLUME
BAND
UP/DOWN
POWER
f,g
f,g
s
Volume
Press VOLUME DOWN or UP (VOL
control).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Pressing DISPLAY twice displays the adjusted volume level.
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 21 or more, it is
automatically turned down to 20 the next time the unit is turned
on.
Graphic equalizer
Selects a sound equalization curve to match the music type.
Press 3-MODE EQUALIZER (ROCK, POP, JAZZ) (EQ
on the remote control repeatedly) to select one of the
three equalization curves.
EQ
- ROCK: Powerful sound emphasizing treble and bass
- POP: More presence in the vocals and midrange
VOLk/i
- JAZZ: Accented lower frequencies for jazz-type music
a
To cancel equalization
Press the selected equalization mode button (EQ on the remote
control repeatedly).
"EQ OFF" is displayed.
Q SOUND system
The Q SOUND system creates a wider sound area by processing
/ on the remote
k i the original music signals electronically.
Press QSOUND.
"Q SOUND" is displayed.
To cancel the Q SOUND
Press QSOUND so that "Q SOUND" disappears from the
display.
Tip:
When the QSOUND system is activated, the sound may be
distorted. If this happens, decrease the volume.
En
7