Computer Mount Assembly And Adjustment - Deda Elementi Jet Clip-On User Manual

5.1 COMPuTER MOuNT ASSEMbLY ANd AdJuSTMENT

Ensure the computer mount with the screws (6) on the extension.
Computer alignment:
16
1. Completely unscrew the insert fixing screw (5).
2. Remove the insert (4).
3. Slightly unscrew the adjustment screws (3).
4. Center the top support.
16
5. Tighten the adjustment screws (3).
6. Install the insert as the following schema according to the type of computer:
WAHOO
GARMIN
7. Add and tighten the insert fixing screw (5).
BRYTON