Page of 10

Flymo Sabre Trim Owner's Manual

Flymo sabre trim owner's manual.
Hide thumbs
Sabre Trim
For all customer enquiries or for replacement parts, contact:-
☎ ☎
01325 300303

   Summary of Contents for Flymo Sabre Trim

  • Page 1

    Sabre Trim For all customer enquiries or for replacement parts, contact:- ☎ ☎ 01325 300303

  • Page 2: Carton Contents

    Keep others, including children, pets and bystanders outside the 10 metre hazard zone. Stop the trimmer imme- diately if you are approached. Carton Contents steady handle storage holder...

  • Page 3: Assembly Instructions

    - objects may be thrown by the cutting line. 12. Beware of cut-off pieces of nylon line ejected during use. 13. If you hit an object, do not use your trimmer until you are sure that the entire trimmer is in a safe operating condition.

  • Page 4

    Push the Trimmer Head onto the Sabre Handle until you hear a click. (E1) Push the Trimmer Head further onto the Sabre Handle until it reaches the mark shown in Fig E2. Turn the Trimmer Head collar until it is secure. (E3) Fitting the Steady Handle 1.

  • Page 5

    Auto Line Feed System How the automatic line feed works (H) 1. When initially switching on the trimmer, a small length of line is fed out. 2. A ‘clattering’ noise will be heard when the nylon line hits the line cutter. DO NOT BE ALARMED this is quite normal.

  • Page 6: How To Trim And Edge

    (K2), release lock-off button. How to trim 1. Cut with nylon line at an angle using the tip. (L). 2. Swing trimmer in and out of the cutting area taking small cuts (M) 3. Line is fed out automatically every time the trimmer head stops rotating and returns to operating speed.

  • Page 7: Manual Line Feed, Cutting Head

    Remember ! Your product is designed to use only nylon line with a maximum diameter of 1.5mm. Use only genuine Flymo nylon line. 1. Take approximately 10 metres of line. Insert 15mm of line into the hole in the spool (W) and wind line in the direction of the arrows on the top of the spool.

  • Page 8

    Fig Y2 3. Attach the Trimmer Head Storage Holder to the wall with the two screws provided (Z1) 4. Store the Trimmer Head in the holder as illustrated in Fig Z2 • Store in a cool, dry place and out of reach of chil- dren.

  • Page 9

    A network of specialist dealers can be found in your local Yellow Pages. T o obtain service on your Flymo product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.

  • Page 10: Ec Declaration Of Conformity

    I, the undersigned M. Bowden of Husqvarna Outdoor Products, Aycliffe Industrial Park, NEW- TON AYCLIFFE, Co. Durham. DL5 6UP. Certify that the Product:- Battery Lawn Trimmer Category... Husqvarna Outdoor Make... Products Conforms to the specifications of Directive 2000/14/EEC Cutting Line Type of Cutting Device...

This manual also for:

Sabre trim gtc24a

Comments to this Manuals

Symbols: 0
Latest comments: