Heating Circuits; Operating Mode; Setpoints - Siemens Albatros 2 RVS13 Series User Manual

operating mode

Setpoints

Room temperature
Frost protection
Comfort setpoint max
56/109
Siemens
Building Technologies
6.3.3

Heating circuits

For the heating circuits, there are various functions available which can be individually
set for each heating circuit.
Line no.
1300
The operating mode of heating circuits 1 and 2 is selected directly with the operating
mode button while the operating mode of heating circuit P is to be selected in
programming mode (operating line 1300).
This setting is used to switch between the different operating modes. The functionality
corresponds to operating mode selection with the operating mode button. For details,
refer to section "Operation".
Line no.
HC1 HC2 HCP
710 1010 1310
712 1012 1312
714 1014 1314
716 1016 1316
The room temperature can be shifted according to different setpoints. These setpoints
become active depending on the selected operating mode, thus producing different
temperature levels in the rooms.
The ranges of adjustable setpoints result from the interdependencies, as this is shown
in the following diagram.
0 2 4 6
TRKmax Comfort setpoint max
TRK Comfort cooling
setpoint
TRR Reduced setpoint
TRF Frost protection setpoint
In Protection mode, the room temperature is prevented from falling below a certain
level. This means that the frost protection setpoint of the room temperature will be
maintained.
The room temperature can be shifted according to different setpoints. These setpoints
become active depending on the selected operating mode, thus producing different
temperature levels in the rooms.
The ranges of adjustable setpoints result from the interdependencies, as this is shown
in the following graph.
User Manual
6 The settings in detail
Operating line
Operating mode
Protection
Automatic
Reduced
Comfort
Operating line
Comfort setpoint
Reduced setpoint
Frost protection setpoint
Comfort setpoint max
TRR
TRF
8 10 12 14 16
TRKmax
TRK
18 20 22 24 26
2358Z01
°C
CE1U2357en
2014-07-30