Table of Contents
Advertisement
Planning
installation
Connections
Dimensions and drilling plan
Siemens
Building Technologies
3.5 Room unit QAA55.110
The room unit should be located in the main living room while giving consideration to
the following points:
· The place of installation should be chosen such that the sensor can capture the room
temperature as accurately as possible without getting adversely affected by direct
solar radiation or other heat or refrigeration sources (about 1.5 meters above the
floor)
· In the case of wall mounting, there must be sufficient clearance above the unit,
enabling it to be fitted and removed
When the unit is removed from its base, power is disconnected so that the unit is out of
operation.
· The controller may not be exposed to dripping water
4
3
6
5
2
1
96
User Manual
3 Mounting and installation
1
CL+
BSB data
2
CL-
BSB ground
4,2
2
1
56
60
19/109
CE1U2357en
2014-07-30
- Quick Links:
- Basic Units Rvs
Hide quick links:
Advertisement
Table of Contents
