Installing The Driver - Aiwa AWP-ZX7 Operating Instructions Manual

Installing the driver

When first connecting the computer to the
system's USB port, you must install the driver.
The driver is supplied as standard with the OS.
The installation procedure differs according to
the OS type. Follow the procedures described
below. (Also see the operation manual supplied
with the computer.)
For Windows 98 Second
Edition/Windows Millennium
Edition
To install the USB driver
1
Start up the computer.
2
Press ?/1 to turn on the system.
3
Press FUNCTION repeatedly to switch the
function to PC.
4
Connect the system to the computer with the
USB cable (see page 25).
The computer automatically detects the
system and begins the device (OS standard
driver) installation.
26 GB
5
Follow the instructions appearing on the
monitor.
The illustrations above show examples of Windows
Millennium Edition screens.
Notes
• The OS CD-ROM may be required depending on
your computer. In this case, follow the instructions
and set the CD-ROM in the drive.
• Do not disconnect or connect the USB cable during
detection.