MDR-ZX770BN/ZX770BT/ZX780DC
Ver. 1.1
2-12. BATTERY (R-ch)
1 Peel off the adhesive battery.
2-13. HOUSING (R) (R-ch)
1 Remove the shaft of head band
assy from the housing (R).
7 housing (R)
14
–
–
2 Remove the battery (BAT1)
in the direction of the arrow.
–
R-ch
–
5 volume cushion
housing (R)
volume cushion
3 battery (BAT1)
Note: If removing the battery adhesive tape
of battery (BAT1), can not be re-used
battery (BAT1).
Replace the new parts always.
2 Remove the shaft of head band
assy from the housing (R).
3 Draw out the wire.
5 volume cushion
6 adhesive battery
4 volume button
housing (R)
hole
volume button
guide line
battery (BAT1)
adhesive battery
guide line
(center)
rib