ELEKTRA SPF Instruction Manual page 11

Always request service by a qualified technician. Any repair,
electrical or mechanical adjustment should only be carried out
at the factory or by an authorized service center using only
original spare parts. Failure to comply with these instructions
could jeopardize the safety of the appliance.
The use of accessory attachments not recommended by the
appliance manufacturer may result in fire, electric shock or
injury to persons.
Should the cable be damaged, switch off the appliance and apply
solely to a qualified electrician for replacement.
8 Hould the machine be used no longer, it must be made inope-
rative by cutting the supply cable after having disconnected it
from the electrical power supply.
Make sure that all those parts which could be possible sources
of danger are made harmless.
9 Warning! The surfaces of the appliance remain warm even after
the appliance has been switched off for some time
Do not touch hot surfaces. Use handles or knobs.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
Do not let cord hang over edge of table or counter, or touch hot
surfaces.
Warning! To avoid the risk of injury, do not open the brew
10
chamber during the brew process
11
If the appliance is used by connecting it to the water mains by
means of a pipe and gaskets, it is recommended not to reuse
them after disconnection.
Use pipe and new gaskets to reconnect it.
Save these Instructions.
.
.
11