Related Manuals for fantastic furniture HAVANA Lowline Large
Summary of Contents for fantastic furniture HAVANA Lowline Large
- Page 1 Version 1.0 TWO PEOPLE HAVANA Lowline Large REQUIRED www.fantasticfurniture.com.au...
- Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...
-
Page 3: Assembly Checklist
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled. -
Page 4: What You Need
What you need to assemble the product Side Top Panel Panel (P1) (P5) (P8) (P10) DO NOT USE Right Additional Tools Required Flat head screwdriver; Divider Back Panel Phillips head screwdriver; (P4) (P11) Hammer Shelf Panel Left (P6) Divider Parts list (P3) Box 1: Top Panel (P1);... - Page 5 Step 1 You will need 1 x CR Runner 1 x CL Runner Track (H6) Track (H7) 6 x Small Phillips head Screws (H5) screwdriver (P4) Raw edge (P3) PVC edge Attach 1 x CL Runner Track (H6) to Left Divider (P3) with 3 x Small Screws (H5). Attach 1 x CR Runner Track (H7) to Right Divider (P4) with 3 x Small Screws (H5).
- Page 6 Step 3 You will need (P8) (P7) 8 x Cam Bolts Phillips head (H3) screwdriver (P9) (P10) Attach 8 x Cam Bolts (H3) into Legs (P7, P8, P9, P10) using a Phillips head screwdriver. Step 4 Make sure raw edge is facing up.
- Page 7 Step 5 (P5) Cam Nut hole You will need nearby top 2 x Inside 4 x Small Hexagonal Bolts Back panel slot Dowels (H2) (H18) 1 x Allen (H19) (P2) (P5) Insert 4 x Small Dowels (H2) into the holes of Bottom Panel (P2). Attach Side Panels (P5) to to Bottom Panel (P2) with 2 x Inside Hexagonal Bolts (H18) using an Allen Key (H19).
- Page 8 (P9) Step 7 You will need (P5) Dowels 4 x Cam Nuts (H1) (H4) (P10) Flat head screwdriver (P2) (P5) Insert 4 x Dowels (H1) into the holes of Bottom Panel (P2). Insert 4 x Cam Nuts (H4) into the holes of Bottom Panel (P2) and Side Panels (P5). Rotate the cam nuts so the arrows point towards the incoming cam bolts.
- Page 9 (P8) Step 9 If the floor is uneven, please twist the adjustable legs to stabilize the table. You will need (P10) 2 x Adjustable 4 x Plastic Support Legs Glides (H21) (H17) (P7) Hammer (P2) (P9) Twist 2 x Adjustable Support Legs (H17) to the bottom of Bottom Panel (P2) as shown. Hammer 4 x Plastic Glides (H21) on Legs (P7, P8, P9, P10).
- Page 10 Step 11 You will need 10 x Cam Bolts Phillips head (H3) screwdriver Attach 10 x Cam Bolts (H3) into Top Panel (P1) using a Phillips head screwdriver Step 12 You will need (P1) 10 x Cam Nuts Flat head (H4) screwdriver (P8)
- Page 11 Step 13 You will need 8 x Timber 4 x Hinges Screws (H16) (H15) 2 x Handles 4 x Round Head (H13) Bolts (H14) (P13) Phillips head (P12) screwdriver Attach 4 x Hinges (H15) to Doors (P12, P13) with 8 x Timber Screws (H16). Attach 2 x Handles (H13) to Doors (P12, P13) with 4 x Round Head Bolts (H14).
- Page 12 Step 15 You will need 5 x Small Cam Phillips head (P14) Bolts (H10) screwdriver Screw 5 x Small Cam Bolts (H10) into Drawer Front (P14) with a Phillips head screwdriver. Step 16 (P19) (P15) You will need 5 x Small Cam 1 x Small Nuts (H11) Dowel (H2)
- Page 13 Step 18 You will need (P18) (P15) 6 x Long Phillips head Screws(H12) screwdriver (P16) Attach Drawer Back (P18) to Drawer Sides (P15, P16) and Drawer Support (P19) with 6 x Long Screws (H12), make sure that the groove lines up the whole way around the drawer. Tighten Screws using a Phillips head screwdriver.
-
Page 14: Job Complete
Step 21 Slide the drawer into the cabinet. Recommended weight capacity : 80KG. Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. www.fantasticfurniture.com.au PAGE 14... - Page 15 Top panel Door Adjust the door move in or out a little projective line of projective line of top panel top panel Top panel door The door should The door should door move out a little move in a little Door Top panel Top panel...