fantastic furniture HAVANA Manual page 8

Step 8
You will need
Flat head
4 x Small Cam
screwdriver
Nuts (H11)
Insert 4 x Small Cam Nuts (H11) into the holes of Drawer Sides (P6) and (P7).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Sides (P6) and (P7) into place and tighten the cam nuts using a Flat head screwdriver.
Step 9
Slide Drawer Base (P8) into the groove
in Drawer Sides (P6) and (P7).
Step 10
You will need
4 x Long
Phillips head
Screws(H12)
screwdriver
Attach Drawer Back (P9) to Drawer Sides (P6) and (P7)
with 4 x Long Screws (H12), make sure that the groove lines up
the whole way around the drawer.
Tighten Screws using a Phillips head screwdriver.
www.fantasticfurniture.com.au
(P6)
H11
H11
(P5)
(P6)
This is how a cam nut works ........
(P7)
H11
(P8)
(P7)
H12
H12
(P6)
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H11
(P9)
H12
H12
(P7)
PAGE 8