fantastic furniture HAVANA Manual page 6

Step 4
You will need
4 x Dowels 2 x Cam Nuts
(H1) (H4)
Flat head
screwdriver
Insert 4 x Dowels (H1) and 2 x Cam Nuts (H4) into the holes of Bottom Panel (P2) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach 2 x Legs (P4) to Bottom Panel (P2), then tighten the cam nuts using a Flat head screwdriver.
Step 5
You will need
4 x Dowels
2 x Cam Nuts
(H1)
(H4)
5 x Plastic
1 x Double Ended
Glides (H14)
Screws (H17)
Flat head
Hammer
screwdriver
Insert 4 x Dowels (H1) and 2 x Cam Nuts (H4) into the holes of Bottom Panel (P2) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach 2 x Legs (P4) to Bottom Panel (P2), then tighten the cam nuts using a Flat head screwdriver.
Attach Support Leg (P10) to Bottom Panel (P2) with 1 x Double Ended Screws (H17).
Hammer 5 x Plastic Glides (H14) on 4 x Legs (P4) and Support Leg (P10).
www.fantasticfurniture.com.au
(P4)
H1
H1
H4
(P4)
H1
H1
(P4)
H1
H1
This is how a cam nut works ........
(P2)
(P4)
H1
H14
H17
H4
(P2)
(P10)
H14
H4
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H1
H14
H4
H14
H14
PAGE 6